VMWare Forged Transmits - and how it blocks Nested Virtualization

Nested Virtualization is probably never a good idea in general, but there are certain cases where you need it. We happened to be in one of those certain cases.

After creating a VM on VMWare (CentOS7), we installed libVirtD.

The first issue we ran into, was that nobody had checked a checkbox called "Expose Hardware Virtualization to GuestOS". As a result, we were able to install libVirtD and launch a nested VM, but when creating the VM with virt-install, it was generated to run in qemu-mode rather than kvm-mode.

We also needed to change the LibVirtD default storage pool to point to a volume, so that it had enough space to run a large qcow2 vendor-provided image.

After running virt-install, we were able to get a virtual machine up and running, and get to the console (we had to toy with serial console settings in virt-install to get this to work).

The adaptor in the nested VM was a host-bridge, and what we found, was that we could - from the nested VM - ping the CentOS7 host VM (and vice-versa). But we couldn't ping anything further than that. The LibVirtD VM, that was hosting the nested VM had no problem pinging anything; it could ping the VM is was hosting, it could ping the default gateway on the subnet, ping other hosts on the subnet, and it could ping out to the internet.

So, the packets  FRAMES, were not getting out to the VMWare vSwitch. Or were they?

In doing some arp checks, we actually saw that the CentOS7 LibVirtD host had a populated arp table. But the tenant nested VM, only had a partially full arp table.

After pulling in some additional network expertise to work alongside us in troubleshooting, this one fellow sent in a link to a blog article about a security policy feature on VMWare vSwitches called Forged Transmits.

I will drop a link to that article, but also post the picture from that article, because the diagram so simply and perfectly describes what is happening.

https://wahlnetwork.com/2013/04/29/how-the-vmware-forged-transmits-security-policy-works/

Not being a VMWare Administrator, I don't know how enabling this works; if it is at the entire vSwitch level, or if it is at a port or port group level, etc.

But - if you ever plan on running nested virtualization on a VMWare Type 1 Hypervisor, this setting will kill you. Your networking won't work for your nested virtual machine, unless you can find some clever way of tunneling or using a proxy.